CLI Guide

cfgSerialConsoleColumns
Table 195. Details of cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal window command
line connected to the serial port. You must log out, then log in again
for the changes to take effect.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with
the line wrap mode ON, if a terminal emulator is used.
Legal Values 0–256
Default 0 (equivalent to 80)
cfgSerialHistorySize (Read/Write)
Table 196. Details of cfgSerialHistorySize
Description Specifies the maximum size of
the serial history buffer.
Legal Values 0 – 8192
Default 8192
cfgSerialSshEnable (Read/Write)
Table 197. Details of cfgSerialSshEnable
Description Enables or disables the secure
shell (SSH) interface on CMC.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 1
Example
racadm getconfig -g cfgSerial
cfgSerialBaudRate=115200
cfgSerialConsoleEnable=1
cfgSerialConsoleQuitKey=^\
cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialTelnetEnable=0
cfgSerialSshEnable=1
CMC Property Database Group and Object Descriptions
131