CLI Guide

cfgSessionManagement
This group contains parameters to configure the number of sessions that can connect to CMC. One instance of the group is allowed.
Displays current settings for and configures idle timeout properties for Web server, Telnet, SSH, and RACADM sessions. Changes to idle
timeout settings take effect at the next login. To disable idle timeout for a connection, set this property to 0.
The following sections provide information about the objects in the cfgSessionManagement group.
cfgSsnMgtRacadmTimeout (Read/Write)
Table 188. Details of cfgSsnMgtRacadmTimeout
Description Defines the idle timeout in seconds for the Remote RACADM interface. If a remote RACADM session remains
inactive for more than the specified timeout, the session is automatically ended.
Legal Values 0, 10 –1920
Default iDRAC - 60
CMC - 30
Example
racadm getconfig -g cfgSessionManagement cfgSsnMgtWebserverTimeout=0
cfgSsnMgtTelnetIdleTimeout=0
cfgSsnMgtSshIdleTimeout=300
cfgSsnMgtRacadmTimeout=0
cfgSsnMgtWebserverTimeout (Read/Write)
Table 189. Details of cfgSsnMgtWebserverTimeout
Description Defines the Web server time-out. This property sets the amount of time (in seconds) that a
connection is allowed to remain idle (there is no user input). The session is cancelled if the time
limit set by this property is reached. Changes to this setting do not affect the current session.
You must log out and log in again to make the new settings effective.
An expired Web server session logs out the current session.
Legal Values 60 – 10800
Default 1800
cfgSerial
This group contains configuration parameters for CMC services. One instance of the group is allowed.
Use this object with the getconfig or config subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgSerial group.
NOTE:
The cfgSerial object group is applicable for iDRAC Enterprise on server modules for only two properties—
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
CMC Property Database Group and Object Descriptions 129