CLI Guide

Synopsis • racadm setractime -d <yyyymmddhhmmss.mmmmmmsoff>
• racadm setractime -l YYYYMMDDhhmmss
• racadm setractime -z {?|timezone|timezone-prefix*}
Input • -d — Sets the time to value in the string:
— yyyy is the year
— mm is the month
— dd is the day
— hh is the hour
— mm is the minutes
— ss is the seconds
— mmmmmm is the number of microseconds
— s is a + (plus) sign or a - (minus) sign, which indicates the sign of the offset.
— off is the offset in minutes
NOTE: 'Off' is the offset in minutes from GMT and must be in 15-minute
increments. The timezone is represented as an offset from GMT, and the clock does
not automatically adjust to daylight savings time (for the '-d' option).
• -z <zone> - Sets the time zone by name or index, or lists possible time zones. For example,
PST8PDT (Western United States), 294 (Seoul), 344 (Sydney). <zone> may be:
— <?> lists the major timezone names/prefixes.
— <timezone> is the case-sensitive name of your timezone or the index listed by '-z
timezone-prefix*'.
— <timezone-prefix*> is a prefix of one or more timezones, followed by '*'.
NOTE:
The timezone or daylight savings time is fully supported for '-l' and '-z'
options. Omit the '-l' option to set the timezone only (eg. '-z US/Central').
• -l — Sets the local date and time in the string yyymmddhhmmss where:
— yyyy is the year
— mm is the month
— dd is the day
— hh is the hour
— mm is the minute
— ss is the second
— Setting the time using the -l and -z options is recommended. This command format allows
the CMC to fully support local time zones, including the ability to automatically adjust the
CMC time to the local Daylight Savings Time.
Example
The setractime subcommand supports dates ranging from 1/1/1970 00:00:00 through
12/31/2030 23:59:59. To set the local time to October 24, 2007 at 3:02:30 PM:
racadm setractime -l 20071024150230
The time was set successfully.
102 RACADM Subcommand Details