CLI Guide

NOTE: To use this subcommand, you must have Chassis Administrator privilege.
NOTE: The slot assignment feature is licensed.
Synopsis
racadm setpciecfg assign [-c <FQDD>] [-i <server slot>]
racadm setpciecfg unassign [-c <FQDD>]
racadm setpciecfg ridethru -e
racadm setpciecfg ridethru -d
racadm setpciecfg ridethru -t <time out value>
Input
• -c — Use this option to specify a PCIe adapter or Virtual Adapter.
• -i — Use this option to specify the server or module slot number.
• FQDD — FQDD of the specified PCIe slot or Virtual Adapter.
• -e — Use this option to enable the ride-through mode.
• -d — Use this option to disable the ride-through mode.
• -t — Use this option to set the time-out property of a ride-through mode in seconds (0, 60–1800; 0=infinite).
Example
• Assign a PCIe slot to a server:
racadm setpciecfg assign -c PCIE.ChassisSlot.5 -i 2
• Assign the Virtual Adapter to a server:
racadm setpciecfg assign -c RAID.ChassisIntegrated.1-1-2 -i 3
• Unassign a PCIe slot:
racadm setpciecfg unassign -c PCIE.ChassisSlot.3
• Unassign a Virtual Adapter:
racadm setpciecfg unassign -c RAID.ChassisIntegrated.1-1-3
• Enable ride-through mode
racadm setpciecfg ridethru -e
IOV000: Successfully completed the operation.
• Disable ride-through mode
racadm setpciecfg ridethru -d
IOV000: Successfully completed the operation.
• Set the ride-through time out value in seconds (0, 60–1800; 0 = infinite)
racadm setpciecfg ridethru -t 300
IOV000: Successfully completed the operation.
setractime
Table 125. Details of setractime
Description Sets the date and time on the CMC.
To use this subcommand, you must have the Administrator privilege.
RACADM Subcommand Details 101