Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.20 For Dell PowerEdge VRTX
41424344454647484950
2 Power Up chassis.
3 Login to CMC Racadm and run the following command when the servers are in powered o state:
racadm raid set controllers:RAID.ChassisSlot.5-1 –p HighAvailabilityMode ha
4 Run the command racadm raid set controllers:RAID.ChassisSlot.6-1 –p HighAvailabilityMode ha on
External Shared PERC 8 card in slot 6.
5 Resetting both the PERCs may take two minutes to reect in HA mode.
6 Power down chassis and connect the enclosures in HA Mode.
7 Power Up chassis.
8 External Shared PERC 8 card is in HighAvailabiltiy Mode and the HA status is seen by using the following command:
racadm raid get controllers -o -p HighAvailabilityMode
.
50 Logging in to CMC