Users Guide

Item Description
Firmware version Firmware version of the Hard Disk Drive
State Oine, Online, or Standby — Indicates the power status of the hard disk drive.
Table 56. Server Status
Item Description
Name/Location Example: Server 1, Server 2, and so on.
No Errors If there are no errors, No Errors is displayed. Else, error messages are listed where critical ones are rst listed, and
then the warning-related. For more information, see "LCD Error Messages".
Slot Name Chassis slot name. For example, SLOT-01.
NOTE: You can set this table through the CMC CLI or CMC Web interface.
Model Number Displays if iDRAC nished booting.
Service Tag Displays if iDRAC nished booting.
BIOS Version Server BIOS rmware version.
iDRAC DNS Name Displays the DNS name of the iDRAC server.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware
Version
Displays if iDRAC nished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is no iDRAC version 1.10.
IP4 <enabled,
disabled>
Displays the current IPv4 enabled state.
IP4 Address:
<address,
acquiring>
Only displays if IPv4 is enabled.
IP6 <enabled,
disabled>
Only displays if iDRAC supports IPv6. Displays current IPv6-enabled state.
IP6 Local Address:
<address>
Only displays if iDRAC supports IPv6 and IPv6 is enabled.
IP6 Global
Address:
<address>
Only displays if iDRAC supports IPv6 and IPv6 is enabled.
FlexAddress
enabled on Fabrics
Only displays if the feature is installed. Lists the fabrics enabled for this server (that is, A, B, C).
Auto Discovery
Status
Displays the automatic discovery status of the server.
The information in the table is dynamically updated. If the server does not support this feature, then the following information does not
appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Eect.
• Option “Custom” = Allows you to enter a string name for the server.
232
Using LCD Panel Interface