Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.20 For Dell PowerEdge VRTX
201202203204205206207208209210
Enclosure Management Module
Enclosure Management Module (EMM) provides data path and enclosure management tasks for enclosure. EMM monitors and controls
the enclosure components and access to the drives.
EMM communicates enclosure attributes and states to the host server. The EMM modules monitor the following components of the
enclosure:
• Fans
• Power supplies
• Temperature probes
• Insertion or removal of a physical disk
• LEDs on the enclosure
Viewing EMM Status and attributes
EMM status displays the health of the EMM. EMMs contain a status value that is unique from the enclosure. You can have up to two
EMMs. Enclosure rmware creates a status for each EMM.
Viewing EMM Status and Attributes Using Web Interface
To view the status and attributes of the EMM:
Click Chassis Overview → Storage → Enclosures → Properties. The Enclosures page provides the EMM status and attributes of the
enclosures in the chassis. Expand the integrated enclosure or external enclosures to view the status and attributes of the EMM. For more
information, see the CMC Online Help.
Viewing EMM Status and Attributes Using RACADM
To view the status of EMM, use racadm raid get emms -o -p Status command.
To view the attributes of EMM, use racadm raid get emms -o command.
For more information, see the Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide available
at dell.com/support/manuals.
Viewing Enclosure Status and Attributes
CMC displays the health of the enclosure based on the physical components. Data of the enclosures attached to shared storage is
displayed in CMC, but the external enclosures attached to few PCIe cards are not displayed. You must have CMC Login privileges to view
the status and attributes of the enclosures.
Viewing Enclosure Status and Attributes Using Web Interface
To view the status and attributes of the enclosure:
Click Chassis Overview → Storage → Enclosures → Properties. The Enclosures page provides the health status of the enclosures in the
chassis. For more information, see the CMC Online Help.
206
Managing Chassis Storage