Users Guide

6 Specify the name of the person receiving the email alert:
racadm config -g cfgEmailAlert -o cfgEmailAlertEmailName <email name> -i <index>
where <email name> is the name of the person or group receiving the email alert, and <index> is the index value specied in step
4 and step 5. The email name can contain up to 32 alphanumeric characters, dashes, underscores, and periods. Spaces are not valid.
7 Set up the SMTP host:
racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain
where host.domain is the FQDN.
You can congure up to four destination email addresses to receive email alerts. To add more email addresses, perform tasks in step 2
through 6.
NOTE: The commands in steps 2–6 overwrite any existing settings congured for the index that you specify (1–4). To
determine whether an index has previously congured values, type racadm getconfig -g cfgEmailAlert — I
<index>. If the index is congured, values appear for the cfgEmailAlertAddress and cfgEmailAlertEmailName objects.
For more information, see the
Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide
available at dell.com/support/manuals.
Conguring CMC To Send Alerts 127