CLI Guide

Server-3-A Reserved Present

Switch-4 Not Installed Not Present Not Installed Not Installed Not Installed

Switch-1 Not Installed Not Present Not Installed N/A N/A

NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all commands

are run, the output is displayed as Not Installed in the following columns:

• <Presence>

• <NIC1 MAC Address>

• <NIC2 MAC Address>

getmodinfo

Table 47. getmodinfo

Description

Displays conguration and status information for all modules or a specied module (server, switch, CMC, fan unit,

blower, power supply unit, chassis, DVD, main-board, IO cable, and FPC cable) in the chassis.

To use this subcommand, you must have CMC Login User privilege.

NOTE: The service tag eld is blank for modules that do not have service tags.

Synopsis

racadm getmodinfo [-m <module>] [-A]

Input

• -m <module> — Species the module for which the conguration and status information is required. The default

command (no options) displays information about all the major components in the chassis.

<module> can be one of the following values:

– server-n, where n = 1 to 4

–

switch-n, where n = 1

– CMC-n, where n = 1 or 2

– fan-n, where n = 1 to 6

– blower-n, where n = 1 to 4

– ps-n, where n = 1 to 4

– chassis

– dvd

– main-board

– io-cable

– fpc-cable

– storage

• -A — Does not display the headers and labels in the output.

Example

• racadm getmodinfo -m switch-1

Switch-1 Present

ON OK N/

A N/A

• racadm getmodinfo

NOTE: A power state of "Primary" denotes Active CMC.

module> <presence> <pwrState> <health> <svcTag>

RACADM Subcommand Details 47