CLI Guide
NOTE: If FlexAddress is not activated on the chassis, the
command displays server-assigned MAC/WWN addresses.
If the slot is empty, the command leaves the server-
assigned MAC/WWN addresses blank. If an external
console controls the MAC/WWN addresses, the command
displays an externally managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i <slotNum> — Species the slot information to be displayed.
<slotNum> must be from 1 to 4.
Table 31. Example
<Slot#> <Status> <Server Presence>
1 Enabled Present
2 Enabled Present
3 Enabled Not Present
4 Enabled Not Present
Table 32. FlexAddress setting
<Name> <Type> <Server-Assigned> <Chassis-Assigned>
slot4-idrac Controller 18:A9:9B:FD:C7:57 F8:DB:88:3D:
9F:A7(active)
slot4-A 10 GbE KR 00:90:FA:51:36:54 F8:DB:88:3D:
9F:A8(active)
10 GbE KR/3 00:90:FA:51:36:55 F8:DB:88:3D:
9F:AA(active)
FCoE-WWN 10:00:00:90:FA:51:36:55 20:01:F8:DB:88:3D:
9F:AA(active)
10 GbE KR/3 00:90:FA:51:36:56 F8:DB:
88:3D:A2:78(active)
NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.
getioinfo
Table 33. getioinfo
Description Displays general information about the I/O modules on the chassis.
To use this subcommand, you must have the CMC Login User privilege.
RACADM Subcommand Details 41