CLI Guide

Example
racadm cmcchangeover
cong
Table 13. Cong
Description Allows you to set CMC conguration parameters individually or to batch them as part of a conguration le. If the
data is dierent, that CMC object is written with the new value.
Synopsis
racadm config [-c|-p] -f <filename>
racadm config -g <groupName> -o <objectName> [-i
<
index>] <Value>
NOTE: The conguration le retrieved using remote racadm are not interoperable. For the cong -f < le
name > command, use the conguration le retrieved from the same interface.
Input
NOTE: The -f and -p options are not supported for the serial/Telnet/SSH console.
• -f — The -f <lename> option causes cong to read the contents of the le specied by <lename> and
congure CMC.
NOTE: When the –f option is specied and conguration of an attribute fails, then conguration of
other attributes in that group is skipped.
• -p— This option must be used with the -f option. It directs cong to delete the password entries contained in
the cong le -f <lename> after the conguration is complete.
To apply the password, you must remove the preceding Read-Only marker '#' in the cong le before executing
the cong -f command.
• -g— The -g <groupName>, or group option, must be used with the -o option. The <groupName> species the
group containing the object that is to be set.
• -o — The -o <objectName> <Value>, or object option, must be used with the -g option. This option species
the object name that is written with the string <value>.
• -i — The -i <index>, or index option, is valid only for indexed groups and can be used to specify a unique group.
The <index> is a decimal integer from 1 through n, where n can vary from 1 to maximum number of indexes a
particular group supports. If -i <index> is not specied, a value of 1 is assumed for groups, which are tables that
have multiple entries. The index is specied by the index value, not a named value.
• -c — The -c, or check option, is used with the cong subcommand and allows the user to parse the .cfg le
to locate syntax errors. If issues are found, the line number and a short description about the issue is displayed.
This option is a check-only.
Output This subcommand generates error output for any of the following reasons:
• Invalid syntax, group name, object name, index, or other invalid database members.
• RACADM CLI failures.
This subcommand returns an indication of the number of conguration objects that were written out of the total
objects in the .cfg le.
Examples
• racadm config -g cfgLanNetworking -o cfgNicIpAddress 192.168.0.5.
Sets the cfgNicIpAddress conguration parameter (object) to the value 192.168.0.5. This IP address object is
contained in the cfgLanNetworking group.
• racadm config -f myrac.cfg.
Congures or recongures CMC. The myrac.cfg le may be created from the getcong command. This le
may also be edited manually as long as the parsing rules are followed.
NOTE: The myrac.cfg le does not contain passwords. To include passwords in the le, you must enter
them manually. If you want to remove password information from the myrac.cfg le during
conguration, use the -p option.
28 RACADM Subcommand Details