CLI Guide
cfgDvdMapping (Read/Write)
Table 331. Details of cfgDvdMapping
Description Maps the slots to the DVD drive in the chassis:
Legal Values 1, 2, 3, and 4 are the slot numbers that are specied.
Default 1
cfgDvdSlot<num>Enable (Read/Write)
Table 332. Details of cfgDvdSlot<num>Enable
Description Enable the slots (1 to 4) to access the DVD:
• cfgDvdSlot1Enable
• cfgDvdSlot2Enable
• cfgDvdSlot3Enable
• cfgDvdSlot4Enable
Legal Values 0 disables the mapping and 1 enables the mapping.
Default None
cfgLcdInfo
This group is used to view the LCD locale, LCD orientation, and to check if the buttons to navigate through the LCD menu are enabled.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
The legal values when you run the getconfig -g cfgLcdInfo to view information about the following are:
• cfgLcdLocale=es
• cfgLcdOrientation=0
• cfgLcdButtonsEnable=1
cfgAlerting
This group is enables or disables SNMP event trap alerting and sets the event lter.
Use this object with the cong or getcong subcommands.
176
CMC Property Database Group and Object Descriptions