CLI Guide

Example

racadm getconfig -g cfgStandardSchema -i 1

NOTE: -i <number> is for the index.

# cfgSSADRoleGroupIndex=1

cfgSSADRoleGroupName=

cfgSSADRoleGroupDomain=

cfgSSADRoleGroupPrivilege=

$ config -g cfgStandardSchema -i 1 -o cfgSSADRoleGroupName Charlie

Object value modified successfully

Table 297. Bit masks for Role Group privileges

Role Group Privilege Bit Mask

Congure iDRAC 0x00000002

Congure Users 0x00000004

Clear Logs 0x00000008

Execute Server Control Commands 0x00000010

Access Virtual Console 0x00000020

Access Virtual Media 0x00000040

Test Alerts 0x00000080

Execute Debug Commands 0x00000100

cfgChassisPower

This group is applicable only to CMC and contains parameters to display or congure power for the chassis.

Use this object with the cong or getcong subcommands.

To use this object property, you must have the Chassis Conguration Administrator privilege.

The following sections provide information about the objects in the cfgChassisPower group.

NOTE

: While conguring chassis power from a le, update the value for one chassis power cap property and remove the values

for the other chassis power cap properties or, update the last percentage value as it is applicable to all chassis power cap

properties. The chassis power cap properties are: cfgChassisPowerCap, cfgChassisPowerCapF,

cfgChassisPowerCapBTU, cfgChassisPowerCapFBTU, cfgChassisPowerCapPercent, and

cfgChassisPowerCapFPercent.

CMC Property Database Group and Object Descriptions 165