CLI Guide

Default 1
Example
racadm config -g cfgLanNetworking -o
cfgNicVlanID
1
cfgDNSDomainNameFromDHCP (Read or Write)
Table 148. Details of cfgDNSDomainNameFromDHCP
Description Species that the DNS domain name should be assigned from the
network DHCP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgIPv6Enable and cfgIPv6AutoCong are set to 1 (true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1 (true):
• cfgNicIPv4Enable
• cfgNicUseDhcp
• cfgIPv6Enable
• cfgIPv6AutoConfig
• cfgDNSDomainNameFromDHCP
• cfgDNSDomainName (Read/Write)
The network administrator must make sure that these DHCP servers are congured to provide the same DNS domain name to the CMC,
otherwise the domain name becomes unpredictable.
cfgDNSDomainName (Read or Write)
Table 149. Details of cfgDNSDomainName
Description This is the DNS domain name. This parameter is valid only if
cfgDNSDomainNameFromDHCP is set to 0 (FALSE).
Legal Values A string of up to 254 ASCII characters. At least one of the
characters must be alphabetic. Characters are restricted to
alphanumeric, '-', and '.'.
NOTE: Microsoft Active Directory supports only Fully
Qualied Domain Names (FQDN) of 64 bytes or fewer.
Default <blank>
114 CMC Property Database Group and Object Descriptions