CLI Guide

Example

racadm sslcsrgen -s

racadm sslcsrgen -g -f c:\csr\csrtest.txt

NOTE: Before a CSR can be generated, the CSR elds must be congured in the RACADM cfgRacSecurity group. For example:

racadm config -g cfgRacSecurity -o cfgRacSecCsrCommonName MyCompany

NOTE: In telnet/ssh console, you can only generate and not download the CSR le.

NOTE: The duration for generating a CSR key depends on the length specied for the key.

sslresetcfg

Table 132. Details of sslresetcfg

Description Restores the web-server certicate to factory default and restarts

web-server. The certicate takes eect 30 seconds after the

command is entered.

To use this subcommand, you must have the Chassis

Conguration Administrator privilege for CMC.

Synopsis

racadm sslresetcfg

Example

$ racadm sslresetcfg

Certificate generated successfully and

webserver restarted.

set tempprobes

Table 133. Details of set tempprobes

Description Sets the minimum and maximum warning threshold of temperature probe in the enclosure

Synopsis

racadm raid set tempprobes:TempSensor.Embedded.0:Enclosure.External.1

0:RAID.ChassisSlot.6-1 –p MinimumWarningThreshold <value>

racadm raid set tempprobes:TempSensor.Embedded.0:Enclosure.External.1

0:RAID.ChassisSlot.6-1 –p MaximumWarningThreshold <value>

Input -p— The network password of the share.

Example

testcifsshare

Description

Tests the Common Internet File System (CIFS) share with the current SMB version.