Owner's Manual
6 Contents
4 Using the RACADM Command
Line Interface . . . . . . . . . . . . . . . . . . . . . 71
Using a Serial, Telnet, or SSH Console . . . . . . . . . 71
Logging in to the CMC
. . . . . . . . . . . . . . . 72
Starting a Text Console . . . . . . . . . . . . . . . 72
Using RACADM. . . . . . . . . . . . . . . . . . . . . . 72
RACADM Subcommands
. . . . . . . . . . . . . . 73
Accessing RACADM Remotely . . . . . . . . . . . 77
Enabling and Disabling the RACADM
Remote Capability
. . . . . . . . . . . . . . . . . . 78
Using RACADM Remotely. . . . . . . . . . . . . . 78
RACADM Error Messages
. . . . . . . . . . . . . 79
Using RACADM to Configure the CMC
. . . . . . . . . . 80
Configuring CMC Network Properties. . . . . . . . . . 80
Setting Up Initial Access to the CMC
. . . . . . . . 80
Viewing Current Network Settings . . . . . . . . . 81
Configuring the Network LAN Settings
. . . . . . . 82
Configuring the Network Security
Settings (IPv4 Only) . . . . . . . . . . . . . . . . . 88
Using RACADM to Configure Users
. . . . . . . . . . . 89
Before You Begin
. . . . . . . . . . . . . . . . . . 89
Adding a CMC User
. . . . . . . . . . . . . . . . . 90
Using RACADM to Configure Public Key
Authentication over SSH
. . . . . . . . . . . . . . . . . 91
Before You Begin
. . . . . . . . . . . . . . . . . . 91
Generating Public Keys for Windows
. . . . . . . . 92
Generating Public Keys for Linux
. . . . . . . . . . 93
RACADM Syntax Notes for CMC
. . . . . . . . . . 94
Viewing the Public Keys
. . . . . . . . . . . . . . 94
Adding the Public Keys
. . . . . . . . . . . . . . . 94