Owner's Manual

428 Troubleshooting and Recovery
5 The Virtual Reseat Server section of the Reset Components page displays
the following information:
Active CMC
Location
Displays the location of the active CMC.
Redundancy
Mode
Displays Redundant if a standby CMC is present in the chassis, and
No Redundancy if no standby CMC is present in the chassis.
Table 12-13. Virtual Reseat Server
Attribute Description
Slot Displays the slot occupied by the server in the chassis. Slot names
are sequential IDs, from 1 to 16, to help identify the location of the
server in the chassis.
Name Displays the name of the server in each slot.
Present Displays whether the server is present in the slot (Yes or No).
Health OK The server is present and communicating with
CMC. In the event of a communication failure
between CMC and the server, the CMC
cannot obtain or display health status for the
server.
Informational Displays information about the server when
there is no change in health status (OK,
Warning, Se vere).
Warning Warning alerts have been issued, and
corrective action must be taken. If corrective
actions are not taken, critical or severe failures
that can affect the integrity of the server can
occur.
Severe At least one failure alert has been issued.
Severe status represents a CMC system failure,
and corrective action must be taken
immediately.
Table 12-12. CMC Summary
Attribute Description