Owner's Manual

406 Troubleshooting and Recovery
4 Enable traps alerting by typing:
racadm config -g cfgTraps -o cfgTrapsEnable 1 -i
<index>
where <index> is a value 1–4. The index number is used by CMC to
distinguish up to four configurable destinations for traps alerts.
Destinations may be specified as appropriately formatted numeric
Addresses (IPv6 or IPv4), or Fully-qualified domain names (FQDNs).
Hardware Log Failure 0x4000
Hardware Log Warning 0x8000
Server Absent 0x10000
Server Failure 0x20000
KVM Absent 0x40000
KVM Failure 0x80000
IOM Absent 0x100000
IOM Failure 0x200000
Firmware Version Mismatch 0x00400000
Chassis Power Threshold Error 0x01000000
SDCARD Absent 0x02000000
SDCARD Error 0x04000000
Chassis Group Error 0x8000000
Table 12-3. Event Traps Filter Masks
(continued)
Event Filter Mask Value