Owner's Manual

Using the iKVM Module 371
To add servers to the scan list:
1
Press <Print Screen>. The
Main
dialog box appears.
2
Click
Setup
and then
Scan
. The
Scan
dialog box appears,
listing of all
servers in the chassis
.
3
Select the box next to the servers you wish to scan.
or
Double-click the server name or slot.
or
Press <Alt > and the number of the server you wish to scan. You can select
up to 16 servers.
4
In the
Time
field, enter the number of seconds (3 through 99) that you
want iKVM to wait before the scan moves to the next server in the
sequence.
5
Click the
Add/Remove
button, and click
OK
.
To remove a server from the Scan list:
1
In the
Scan
dialog box, select the box next to the server to be removed.
or
Double-click the server name or slot.
or
Click the
Clear
button to remove all servers from the
Scan
list.
2
Click the
Add/Remove
button, and click
OK
.
To start Scan mode:
1
Press <Print Screen>. The
Main
dialog box appears.
2
Click
Commands
. The
Command
dialog box appears.
3
Select the
Scan Enable
box.
4
Click
OK
. A message appears indicating that the mouse and keyboard have
been reset.
5
Click to close the message box.