Owner's Manual

368 Using the iKVM Module
Logging In
To launch Oscar:
1
Press <Print Screen> to launch OSCAR. The Password dialog box
appears.
2 Type your password and then click OK . The Main dialog box appears.
Setting Automatic Logout
You can set OSCAR to automatically log out of a server after a period of
inactivity.
1
In the Main dialog box, click Setup and then Security .
2 In the Inactivity Time field, enter the length of time you want to stay
connected to a server before it automatically disconnects you.
3 Click OK .
Removing Password Protection From Your Console
To remove password protection from your console:
1
From the Main dialog box, click Setup and then Security .
2 In the Security dialog box, single-click and press <Enter>, or double-click
in the
New field.
3 Leaving the New field empty, press <Enter>.
4 Single-click and press <Enter>, or double-click in the Repeat field.
5 Leaving the Repeat field empty, press <Enter>.
6 Click OK if you only want to eliminate your password.
Enabling Screen Saver Mode With No Password Protection
NOTE: If your console is password protected, you must first remove password
protection. Follow the steps in the previous procedure before following
the steps below.
To enable Screen Saver mode without password protection:
1
Select Enable Screen Saver .
2 Type the number of minutes (1 through 99) that you want to delay
activation of the screen saver.