Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 3.2
351352353354355356357358359360
Power Management 351
Using the Web Interface
To execute power control operations on an IOM using the CMC Web
interface:
1
Log in to the CMC Web interface.
2
Select
I/O Modules Overview
.
The
I/O Modules Status
page displays.
3
Click the
Power
tab.
The
Power Control
page displays.
4
Select the operation you want to execute (
reset
or
power cycle
) from the
drop-down menu beside the IOM in the list.
5
Click
Apply
.
A dialog box appears requesting confirmation.
6
Click
OK
to perform the power management action (for example,
cause the IOM to power cycle).
Using RACADM
To execute power control operations on an IOM using RACADM:
Open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm chassisaction -m switch-<n> <action>
where
<
n
> is a number 1-6 and specifies the IOM (A1, A2, B1, B2, C1, C2),
and
<
action
> indicates the operation you want to execute:
powercycle
or
reset
.