Owner's Manual

Using the CMC Directory Service 285
To turn off SSL certificate validation:
racadm config -g cfgActiveDirectory -o
cfgADCertValidationEnable 0
The SSL certificates for the domain controller must be signed by the root
certificate authority. The root certificate authority-signed certificate must
be available on the management station accessing CMC.
10 Click Apply . The CMC Web server automatically restarts after
you click
Apply .
11 Log back in to the CMC Web interface.
12 Select Chassis in the system tree, click the Network tab, then click the
Network subtab. The Network Configuration page is displayed.
13 If Use DHCP for CMC Network Interface IP Address, is enabled, do one
of the following:
• Select
Use DHCP to Obtain DNS Server Addresses to enable the
DNS server addresses to be obtained automatically by the DHCP
server.
• Manually configure a DNS server IP address by leaving the
Use DHCP
to Obtain DNS Server Addresses
check box unchecked and then
typing your primary and alternate DNS server IP addresses in the
fields provided.
14 Click Apply Changes .
The CMC Extended Schema Active Directory feature configuration
is complete.