Owner's Manual

Using the CMC Directory Service 283
Configuring CMC With Extended Schema Active Directory and the Web
Interface
To configure CMC with Extended Schema Active Directory and the Web
Interface:
1
Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click User Authentication  Directory Services .
The
Directory Services page is displayed.
4 Select Microsoft Active Directory (Extended Schema) .
5 In the Common Setting s section:
a Verify that the Enable Active Directory check box is checked.
b Type t h e Root Domain Name .
NOTE: The Root domain name must be a valid domain name using the x.y
naming convention, where x is a 1–256 character ASCII string with no spaces
between characters, and
y is a valid domain type such as com, edu, gov, int,
mil, net, or org.
c Type t h e Timeout time in seconds. Configuration range:
15–300 seconds.
Default: 90 seconds
6 Optional: If you want the directed call to search the domain controller
and global catalog, select the
Search AD Server to search (Optional)
check box, then:
a In the Domain Controller text field, type the server where your Active
Directory service is installed.
b In the Global Catalog text field, type the location of the global
catalog on the Active Directory domain controller. The global catalog
provides a resource for searching an Active Directory forest.
NOTE: Setting the IP address as 0.0.0.0 disables CMC from searching
for a server.
NOTE: You can specify a list of domain controller or global catalog
servers separated by commas. CMC allows you to specify up to
three IP addresses or host names.