Owner's Manual

280 Using the CMC Directory Service
2 In the Console 1 window, click File (or Console on systems running
Windows 2000).
3 Click Add/Remove Snap-in .
4 Select the Active Directory Users and Computers Snap-In and click Add .
5 Click Close.
Adding CMC Users and Privileges to Active Directory
Using the Dell-extended Active Directory Users and Computers Snap-In, you
can add CMC users and privileges by creating RAC, Association, and Privilege
objects. To add each object type:
1
Create a RAC device Object.
2 Create a Privilege Object.
3 Create an Association Object.
4 Add objects to an Association Object.
Creating a RAC Device Object
To create a RAC Device object:
1
In the MMC Console Root window, right-click a container.
2 Select New  Dell RAC Object .
The
New Object window appears.
3 Type a name for the new object. The name must be identical to CMC
Name that you type in step a of "Configuring CMC With Extended
Schema Active Directory and the Web Interface" on page 283.
4 Select RAC Device Object and click OK .
Creating a Privilege Object
NOTE: A Privilege Object must be created in the same domain as the related
Association Object.
To create a Privilege object:
1
In the Console Root (MMC) window, right-click a container.
2 Select New  Dell RAC Object .
The
New Object window appears.