Owner's Manual

Using FlexAddress Plus 257
When a chassis with no previous FA—either it has never been activated or it
was activated and then deactivated—and it has a server with the network
configuration that requires more addresses than scheme 1 can provide, the
scheme 1 allocation acquires addresses from scheme 1 of FA and scheme 2
allocation acquires addresses from scheme 2 of FA+.
Using the same example, the chassis-assigned MAC addresses of the same
server in this scenarios are as follows:
Fabric A port 2: 00:FA:AE:58:59:2E (from FA)
00:FA:AE:58:59:2F (from FA)
00:FB:AE:58:5A:00 (from FA+)
00:FB:AE:58:5A:01 (from FA+)
Fabric B port 1: 00:FA:AE:58:59:30 (from FA)
00:FA:AE:58:59:31 (from FA)
Fabric B port 2: 00:FA:AE:58:59:32 (from FA)
00:FA:AE:58:59:33 (from FA)
Fabric C port 1: 00:FA:AE:58:59:34 (from FA)
00:FA:AE:58:59:35 (from FA)
Fabric C port 2: 00:FA:AE:58:59:36 (from FA)
00:FA:AE:58:59:37 (from FA)
iDRAC 00:FB:AE:58:59:2B (FA)
Fabric A port 1: 00:FB:AE:58:59:2C (FA)
00:FB:AE:58:59:2D (FA)
00:FB:AE:58:59:FE (FA+)
00:FB:AE:58:59:FF (FA+)
Fabric A port 2: 00:FB:AE:58:59:2E (FA)
00:FB:AE:58:59:2F (FA)
00:FB:AE:58:5A:00 (FA+)
00:FB:AE:58:5A:01 (FA+)
Fabric B port 1: 00:FB:AE:58:59:30 (FA)
00:FB:AE:58:59:31 (FA)