Owner's Manual

230 Using the CMC Web Interface
5 Click Connect to connect to a remote file share. To connect a remote file
share, you must provide the path, user name, and password. A successful
operation allows access to the media.
Click
Disconnect to disconnect a previously connected remote file share.
Click
Deploy to deploy the media device.
NOTE: Save all working files before executing the Deploy command
because this action causes the server to be restarted.
This command involves these actions:
– The remote file share is connected.
– The file is selected as the first boot device for the servers.
– The server is restarted.
– Power is applied to the server if the server is turned off.
Slot Identifies the location of the slot. Slot numbers are sequential from
1 to 16 (for the 16 available slots in the chassis).
Name Displays the name of the slot. Slots are named depending on their
position in the chassis.
Model Displays the model name of the server.
Power State Displays the power status of the server:
N/A – CMC has not yet determined the power state of the server.
Off – Either the server is off or the chassis is off.
On – Both the chassis and the server are on.
Powering On – Temporary state between Off and On. On success,
the Power State is On.
Powering Off – Temporary state between On and Off. On success,
the Power State is Off.
Connect Status Displays the remote file share connection status.
Select/Deselect
All
Select this option before initiating a remote file share operation.
Remote file share operations are: Connect, Disconnect, and Deploy.
Table 5-62. Remote File Sharing Settings
(continued)
Setting Description