Owner's Manual

228 Using the CMC Web Interface
5
Click the check box for each fabric you want to enable FlexAddress on.
To disable a fabric, click the check box to clear the selection.
NOTE: If no fabrics are selected, FlexAddress is not enabled for the selected
slots.
The
Select Slots for Chassis-Assigned WWN/MACs
page displays an
Enabled
check box for each slot in the chassis (1 - 16).
6
Click the
Enabled
check box for each slot you want to enable FlexAddress
on. If you want to select all slots, use the
Select/Deselect All
check box.
To disable a slot, click the
Enabled
check box to clear the selection.
NOTE: If a server is present in the slot, it needs to be powered off before
the FlexAddress feature can be enabled on that slot.
NOTE: If no slots are selected, FlexAddress is not enabled for the selected fabrics.
7
Click
Apply
to save the changes
.
For additional information, click
Help
.
Server-Level Slot FlexAddress Configuration
At the server level, you can enable or disable the FlexAddress feature
for individual slots.
To enable or disable an individual slot to use the FlexAddress feature:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 107).
2
Expand
Server Overview
in the system tree. All of the servers (1–16)
appear in the expanded
Servers
list.
3
Click the server you want to view. The
Server Status
page displays.
4
Click the
Setup
tab, and the
FlexAddress
subtab. The
FlexAddress Status
page is displayed.
5
Use the pull down menu for
FlexAddress Enabled
to make your selection;
select
Yes
to enable FlexAddress or select
No
to disable FlexAddress.
6
Click
Apply
to save the changes. For additional information, click
Help.