Owner's Manual

Using the CMC Web Interface 225
Viewing Server FlexAddress Status
FlexAddress status information can also be displayed for each individual
server. The server level information displays a FlexAddress status overview for
that server.
To view FlexAddress server information:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 107).
2 Expand Server Overview in the system tree. All of the servers (1–16)
appear in the expanded
Servers list.
3 Click the server you want to view.
The
Server Status page displays.
4 Click the Setup tab, and the FlexAddress subtab. The Deploy FlexAddress
page is displayed. This page allows you to view the WWN configuration
and MAC addresses for the selected server.
The status page presents the following information:
Table 5-61. Status Page Information
FlexAddress
Enabled
Displays whether the FlexAddress feature is active or not active
for the particular slot.
Current State Displays the current FlexAddress configuration:
• Chassis-Assigned - selected slot address is chassis assigned using
the FlexAddress. The slot-based WWN/MAC addresses remain
the same even if a new server is installed.
•
Server-Assigned - server uses the server-assigned address or the
default address embedded into the controller hardware.
Power State Displays the current power status of the servers. Values are: On,
Powering On, Powering Off, Off, and N/A (if a server is not
present).