Owner's Manual

Using the CMC Web Interface 219
Name Displays the server name of the server in each slot.
By default, the slots are named SLOT-01 to SLOT-16.
NOTE: The slot name cannot be blank or NULL.
Enable LAN Enables (checked) or disables (unchecked)
the LAN channel.
NOTE: When LAN is not selected (disabled), all other network
configuration settings, (IPMI over LAN, DHCP, IP Address
Subnet Mask and Gateway) are not used. These fields are not
accessible.
Change Root Password Enables (when checked) the ability to change the password
of the iDRAC root user. The iDRAC Root Password and
Confirm iDRAC Root Password fields must be provided
for this operation to be successful.
DHCP If selected DHCP is used to acquire the iDRAC IP address,
subnet mask and default gateway, otherwise the values
defined in the iDRAC network configuration fields are
used. LAN must be enabled to set this field
IPMI over LAN Enables (checked) or disables (unchecked) the IPMI LAN
channel. LAN must be enabled to set this field.
IP Address The static IPv4 or IPv6 address assigned to the iDRAC
located in this slot.
Subnet Mask Specifies the subnet mask assigned to the iDRAC installed
in this slot.
Gateway Specifies the default gateway assigned to the iDRAC which
is installed in this slot.
Enable IPv4 Enables the iDRAC in the slot to use the IPv4 protocol on
the network. You must select the Enable LAN option for
this option to be active. Default setting is enabled.
Enable IPv6 Enables the iDRAC in the slot to use the IPv6 protocol on
the network. You must select the Enable LAN option and
clear the Autoconfiguration option for this option to be
active. Default setting is disabled.
NOTE: This option is available only if the server is
IPv6 capable.
Table 5-60. iDRAC Network Settings
(continued)
Setting Description