Owner's Manual

Using the CMC Web Interface 215
iDRAC QuickDeploy
The iDRAC QuickDeploy section of the Deploy iDRAC page contains
network configuration settings that are applied to newly inserted servers.
You may use these settings to automatically populate the iDRAC Network
Settings table that is below the QuickDeploy section. Once QuickDeploy is
enabled, the QuickDeploy settings are applied to servers when that server is
installed. See step 8 in "Configuring Networking Using the LCD
Configuration Wizard" on page 41 for more information on the iDRAC
QuickDeploy settings.
To enable and set the iDRAC QuickDeploy settings:
1
Log in to the CMC Web interface.
2 Select Server Overview in the system tree.
3 Click the Setup tab. The Deploy iDRAC page appears.
4 Set the QuickDeploy settings accordingly.
Table 5-59. QuickDeploy Settings
Setting Description
QuickDeploy Enabled Enables/disables the QuickDeploy feature that
automatically applies the iDRAC settings configured on
this page to newly inserted servers; the auto configuration
must be confirmed locally on the LCD panel.
NOTE: This includes the root user password if the Set iDRAC
Root Password on Server Insertion box is checked.
Default: Unchecked (disabled)
Set iDRAC Root
Password on Server
Insertion
Specifies whether a server’s iDRAC root password should be
changed to the value provided in the iDRAC Root
Password text box when the server is inserted.
iDRAC Root Password When Set iDRAC Root Password on Server Insertion and
QuickDeploy Enabled are checked, this password value is
assigned to a server's iDRAC root user password when the
server is inserted into chassis. The password can have 1 to
20 printable (including spaces) characters.
Confirm iDRAC Root
Password
Verifies the password entered into the iDRAC Root
Password field.