Owner's Manual

Using the CMC Web Interface 145
Viewing Status of the Temperature Sensors
The Temperature Sensors Status page displays the status and readings of the
temperature probes on the entire chassis (chassis and servers).
NOTE: The temperature probes value cannot be edited. Any change beyond the
threshold generates an alert that causes the fan speed to vary. For example, if the
CMC ambient temperature probe exceeds threshold, the speed of the fans on the
chassis increases.
To view the health status of the temperature probes:
1
Log in to the CMC Web interface.
2 Select Temperature Sensors in the system tree.
The
Temperature Sensors Status page is displayed.
Table 5-33. System Power Status
Item Description
Overall Power Health Displays the health status (OK, Non-Critical,
Critical, Non-Recoverable, Other, Unknown)
of the power management for the entire chassis.
System Power Status Displays the power status (On, Off, Powering On,
Powering Off) of the chassis.
Redundancy Displays the power supply redundancy status. Values
include:
No: Power Supplies are not redundant.
Yes: Full Redundancy in effect.
Table 5-34. Temperature Sensors Health Status Information
Item Description
ID Displays the location of the temperature probe.
Name Displays the name of each temperature probe for the chassis and
servers.
Present Indicates whether the module is present (Yes) or absent (No) in the
chassis.