Owner's Manual

Using the CMC Web Interface 143
Viewing the Health Status of the PSUs
The health status of the PSUs associated with the chassis can be viewed in
two ways: from the Chassis Component Summary section on the Chassis
Health page or the Power Supply Status page. The Chassis Health page
provides a graphical overview of all PSUs installed in the chassis.
To view health status for all PSUs using Chassis Graphics:
1
Log in to the CMC Web interface.
The
Chassis Health page is displayed. The lower section of Chassis
Graphics
depicts the rear view of the chassis and contains the health
status of all PSUs. PSU health status is indicated by the overlay of
the PSU subgraphic:
• No overlay - PSU is present, powered on and communicating with
CMC; there is no indication of an adverse condition.
• Amber caution sign - indicates that only warning alerts have been
issued and that corrective action must be taken.
• Red X - indicates at least one failure condition is present. This means
that CMC can still communicate with the PSU and that the health
status is reported as critical.
• Grayed Out - indicates that the PSU is present and not powered on. It
is not communicating with CMC and there is no indication of an
adverse condition.
2 Use the cursor to hover over an individual PSU subgraphic and a
corresponding text hint or screen tip is displayed. The text hint provides
additional information on that PSU.
3 Clicking on the PSU subgraphic selects that PSU's information and Quick
Links for display to the right of the chassis graphics.
The Power Supply Status page displays the status and readings of the PSUs
associated with the chassis. For more information about CMC power
management, see "Power Management" on page 309.
To view the health status of the
PSUs:
1
Log in to the CMC Web interface.
2 Select Power Supplies in the system tree.
The
Power Supply Status page is displayed.