Owner's Manual

Using the CMC Web Interface 133
Viewing the Health Status of an Individual Server
The health status for an individual server can be viewed in two ways—
from the Chassis Graphics section on the Chassis Health page or the
Server Status page.
The Chassis Health page provides a graphical overview of an individual server
installed in the chassis.
To view health status for individual servers using Chassis Graphics:
1
Log in to the CMC Web interface.
The
Chassis Health page is displayed. The top section of Chassis
Graphics
depicts the front view of the chassis and contains the health
status for individual servers. Server health status is indicated by the overlay
of the server subgraphic:
• No overlay - indicates that the server is present, powered on and
communicating with the CMC; there is no indication of an adverse
condition.
• Amber caution sign - indicates that only warning alerts have been
issued and that corrective action must be taken.
• Red X - indicates at least one failure condition is present. This means
that CMC can still communicate with the component and that the
health status is reported as critical.
• Grayed out - indicates that the component is present and not powered
on. It is not communicating with CMC and there is no indication of
an adverse condition.
2 Move the cursor to hover over an individual server subgraphic.
A corresponding text hint or screen tip is displayed. The text hint provides
additional information on that server.
3 Click the server subgraphic to select that server’s information and display
Quick Links on the right of the chassis graphics.