Owner's Manual
122 Using the CMC Web Interface
Table 5-10. Active CMC Health and Performance
Item Description
Redundancy Mode Displays failover readiness of the standby CMC. If CMC
firmware does not match, or CMC is not cabled properly to
the management network, redundancy appears as not
available.
MAC Address Displays the MAC address for the CMC Network Interface
Card (NIC). The MAC address is a unique identifier for
the CMC over the network.
IPv4 Displays the current IPv4 address for the CMC Network
Interface.
IPv6 Displays the first IPv6 address for the CMC Network
Interface.
Table 5-11. CMC Properties
Item Description
Firmware Displays the firmware version of the active CMC.
Standby Firmware Displays the firmware version installed on the standby
CMC. If you have not installed a second CMC, this field is
displayed NA.
Last Updated Displays when the firmware was last updated. If no updates
have occurred, this field is displayed as NA.
Hardware Displays the hardware version of the active CMC.
Table 5-12. Quick Links - CMC
Item Description
CMC Status Navigate to Chassis Controller
Properties
Status
Networking Navigate to Chassis Overview
Network
Network
Firmware Update Navigate to Chassis Overview
Update
Firmware Update