Owner's Manual

116 Using the CMC Web Interface
Chassis Component Summary
Chassis Graphics
The chassis is represented by front and back views (the upper and lower
images, respectively). Servers and the LCD are shown in the front view and
the remaining components are shown in the back view. Component selection
is indicated by a blue cast and is controlled by clicking the image of the
required component. When a component is present in the chassis, an icon of
that component type is shown in the graphics in the position (slot) where the
component has been installed. Empty positions are shown with a charcoal-
gray background. The component icon visually indicates the state of the
component. The server icon is used in Table 5-1 as an example. Other
components display icons that visually represent the physical component.
Icons for servers and IOMs span multiple slots when a double size component
is installed. Hovering over a component displays a tooltip with additional
information about that component.
Table 5-1. Server Icon States
Icon Description
Server is powered on and is operating
normally.
Server is off.