Owner's Manual

Using the RACADM Command Line Interface 103
Using RACADM to Configure Properties on iDRAC
RACADM config/getconfig commands support the -m <module> option
for the following configuration groups:
•cfgLanNetworking
•cfgIPv6LanNetworking
• cfgRacTuning
• cfgRemoteHosts
•cfgSerial
• cfgSessionManagement
NOTE: For more information on the property default values and ranges, see the
Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise for Blade Servers
User Guide.
If the firmware on the server does not support a feature, configuring a
property related to that feature displays an error. For example, using
RACADM to enable remote syslog on an unsupported iDRAC displays an
error message.
Similarly, when displaying the iDRAC properties using the RACADM
getconfig command, the property values are displayed as N/A for an
unsupported feature on the server.
For example:
$ racadm getconfig -g cfgSessionManagement -m server-1
# cfgSsnMgtWebServerMaxSessions=N/A
# cfgSsnMgtWebServerActiveSessions=N/A
# cfgSsnMgtWebServerTimeout=N/A
# cfgSsnMgtSSHMaxSessions=N/A
# cfgSsnMgtSSHActiveSessions=N/A
# cfgSsnMgtSSHTimeout=N/A
# cfgSsnMgtTelnetMaxSessions=N/A
# cfgSsnMgtTelnetActiveSessions=N/A
# cfgSsnMgtTelnetTimeout=N/A