Users Guide

To update the storage components:
1 In the left pane, click Chassis Overview > Storage > Update.
2 On the Storage Component Update page, click Browse.
The Choose to Upload File dialog box is displayed
3 Browse to location where the required DUP le was downloaded and saved from the Dell support Site and select the DUP le, and
click Open.
The DUP le name and path are displayed in the Browse eld.
4 Click Upload.
The DUP is uploaded to CMC. The Storage Component Update section displays only the components that are supported by the
downloaded DUP le. The current version, latest available version and the Update check box are displayed for the components.
5 Select the appropriate Update check boxes for the required components.
6 Click Update.
The rmware update action is initiated for the selected components. The progress is displayed in the Update column
After the action is complete, an appropriate message is displayed to indicate the completion or failure of the rmware update.
NOTE:
• Servers must be turned o before updating the rmware.
• Component updates other corresponding components in the system similarly. For example The SPERC’s updates similarly to the
existing SPERCs and the EMMs updates similarly to the integrated EMMs.
• Click to view the HDD of dierent enclosures.
Recovering iDRAC Firmware Using CMC
iDRAC rmware is typically updated using iDRAC interfaces such as the iDRAC web interface, the SM-CLP command line interface, or
operating system specic update packages downloaded from support.dell.com. For more information, see the iDRAC User’s Guide.
Early generations of servers can have corrupted rmware recovered using the new update iDRAC rmware process. When CMC detects
corrupted iDRAC rmware, it lists the server on the Firmware Update page. Complete the tasks mentioned in the Updating Server iDRAC
Firmware.
Updating Firmware
69