Users Guide

# comment, the rest of this line is ignored
cfgNicGateway=10.35.9.1
The command racadm config -f <myfile>.cfg parses the le and identies any errors by line number. A correct le updates the
proper entries. Additionally, you can use the same getconfig command from the previous example to conrm the update.
Use this le to download company-wide changes or to congure new systems over the network with the command, racadm
getconfig -f <myfile>.cfg.
NOTE: Anchor is a reserved word and should not be used in the .cfg le.
Conguring Multiple CMCs through RACADM Using
Chassis Conguration Proles
By using chassis conguration proles, you can export the chassis conguration proles as an XML le and import it to another chassis.
Use RACADM get command for export operation and set command for import operation.You can export chassis proles (XML les) from
CMC to the network share or to a local management station and import chassis proles (XML les) from the network share or from a local
management station.
NOTE: By default, the export is done as clone type. You can use the –—clone to get the clone type prole in XML le.
The import and export operation to and from the network share can be done through local RACADM as well as remote RACADM. Whereas,
the import and export operation to and from the local management can be done only through remote RACADM interface.
Exporting Chassis Conguration proles
You can export chassis conguration proles to network share by using the get command.
1 To export the chassis conguration proles as clone.xml le to CIFS network share by using get command, type the following:
racadm get –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC
2 To export the chassis conguration proles as clone.xml le to NFS network share by using get command, type the following:
racadm get –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
You can export chassis conguration proles to network share through a remote RACADM interface.
1 To export the chassis conguration proles as clone.xml le to CIFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l //xx.xx.xx.xx/
PATH –u USERNAME –p PASSWORD
2 To export the chassis conguration proles as clone.xml le to NFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l xx.xx.xx.xx:/
PATH
you can export chassis conguration proles to local management station through remote RACADM interface.
1 To export the chassis conguration proles as clone.xml le, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml
Importing Chassis Conguration proles
You can import chassis conguration proles from network share to another chassis by using the set command.
1 To import the chassis conguration proles from CIFS network share, type the following:
racadm set –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC
100
Conguring CMC