CLI Guide

NOTE: If CMC is not in the network, you cannot import the chassis conguration prole from a

remote network share with proxy using the set command. But, you can import the chassis

conguration prole from the local management station.

Synopsis

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f <filename>

-t xml

racadm set -f <filename> -t xml -u <username> -p <password> -l <CIFS

share>

racadm set -f <filename> -t xml -l <NFS share>

Input

• -f: import CMC conguration or CMC event lter from a le.

• -u: username of the remote share from where the le must be imported.

• -p: password for the remote share from where the le must be imported.

• -l: network share location from where the le must be imported.

• -t: specify the le type to be imported. The valid value is “xml”. This option is case-sensitive.

Example

• Congure event lter congurations from a conguration le using remote racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -f file.txt

• Congure a CMC from an XML conguration le on a local share using remote racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -f myfile.xml -

t xml

• Congure a CMC from an XML conguration le on a remote CIFS share

racadm set -f myfile.xml -t xml -u myuser -p mypass -l //192.168.0.0/

myshare

• Congure a CMC from an XML conguration le on a remote NFS share

racadm set -f myfile.xml -t xml -l 192.168.0.0:/myshare

setassettag

Table 116. Details of setassettag

Description Sets the N-byte ASCII asset tag for the chassis.

To use this subcommand, you must have the Administrator privilege.

NOTE: The special characters \ (backslash), & (ampersand), ` (backward quotation mark),

and " (double quotation mark) are not supported for this subcommand.

Synopsis

racadm setassettag -m chassis <asset tag>

Input -m <module> — Species the module whose asset tag you want to set.

Legal value: chassis

You can obtain the same output if you do not include this option, because there is only one legal value.

<assettag> is a maximum of 64 non-extended ASCII characters.

Example

• racadm setassettag -m chassis 783839–33

RACADM Subcommand Details 95