CLI Guide

– unblink
– clearcong
– importcong
– ccheck
– cancelcheck
– patrolread
– hotspare
– init
– assignva
– createvd
• –o — Displays all the properties of the selected Key or Object.
• –p — Displays the property names with lter.
• FQDD — Displays all the properties of the FQDD's Key.
Example
• racadm raid get controllers
• racadm raid get controllers -o
• racadm raid get controllers -o -p name,status
• racadm raid get vdisks -o -p layout,status
• racadm raid get controllers:RAID.ChassisIntegrated.1-1
• racadm raid get controllers:RAID.ChassisIntegrated.1-1 -p status
• racadm raid resetconfig:RAID.ChassisIntegrated.1-1
• racadm raid exportlog:RAID.ChassisIntegrated.1-1 -l <CIFS or NFS share>
-u <user name> -p <password> [-f <filename>]
• racadm raid forceonline:Disk.Bay.0:Enclosure.Internal.
0-0:RAID.ChassisIntegrated.1-1
• racadm raid deletevd:Disk.Virtual.0:RAID.ChassisIntegrated.1-1
• racadm raid blink:Disk.Virtual.0:RAID.ChassisIntegrated.1-1
• racadm raid clearconfig:RAID.ChassisIntegrated.1-1
• racadm raid importconfig:RAID.ChassisIntegrated.1-1
• racadm raid ccheck:Disk.Virtual.0:RAID.ChassisIntegrated.1-1
• racadm raid cancelcheck:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 {-
pdkey:<comma separated PD FQDDs> | {-vdkey:<comma separated VD FQDDs>}
• racadm raid ccheckall:RAID.ChassisIntegrated.1-1
• racadm raid cancelcheckall:RAID.ChassisIntegrated.1-1
• racadm raid unblink {-pdkey:<comma separated PD FQDDs> | -vdkey:<comma
separated VD FQDDs>}
• racadm raid patrolread:RAID.ChassisIntegrated.1-1 [-mode {auto | manual
| disabled}] [-state {start | stop}] racadm raid hotspare:Disk.Bay.
0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1 -assign {yes | no} -
type { ghs | dhs} -vdkey:<FQDD of VD>
• racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed { fast
| full } racadm raid cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.
1-1 racadm raid assignva:<VA FQDD> -vdkey:<FQDD of VD> -accesspolicy
{ na | rw }
• racadm raid cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.1-1
• racadm raid assignva:<VA FQDD> -vdkey:<FQDD of VD> -accesspolicy { na |
rw } -assignpolicy {single|multiple}
• racadm raid createvd:RAID.ChassisIntegrated.1-1 -rl {r0|r1|r5|r6|r10|
r50|r60} [-wp {wt|wb|fwb}] [-rp {nra|ra|ara}] [-ss {1k|2k|4k|8k|16k|32k|
64k|128k|256k|512k|1M|2M|4M|8M|16M}] -pdkey:<comma separated PD FQDD> [-
dcp {enabled|disabled|default}] [-name <VD name>] [-size <VD size>{b|k|
m|g|t}] [-cc] [-sc {span count}] {-current|-pending} [-vdinit {yes|no}]
[-secure {yes|no}]
88
RACADM Subcommand Details