CLI Guide
discardcache
Table 87. Details of discardcache
Description
Discards any pinned or persistent cache present on the RAID controller.
Synopsis
racadm raid discardcache:<Controller FQDD> {-current | -pending}
Input
• –current <optional>: Performs the conguration right now.
NOTE: If this requires the system to reboot, the system is rebooted.
• –pending: Save the conguration change for a later application. You can use a combination of the –pending and
–current ags on multiple commands to reduce the possible number of system reboots.
Example
racadm raid discardcache:RAID.ChassisIntegrated.1-1
exportlog
Table 88. Details of exportlog
Description
Export a log from the device.
Synopsis
racadm raid exportlog:<FQDD> -l<CIFS or NFS share> -u<username> -p <password> [-
f <filename>]
Input
• –l<CIFS or NFS share>: The network share to write the log to.
• –u<username: The network username for the share.
• –p <password>: The network password for the share
• –f <lename>: The le name to write the log to.
Example
racadm raid exportlog:RAID.ChassisIntegrated.1-1 -l <CIFS or NFS share> -
u<username> -p <password> [-f <filename>]
forceonline
Table 89. Details of forceonline
Description
Forces the RAID Controller to make the specied drive online. This operation may result in obsolete or corrupted
data, and should only be attempted in cases where a rebuild operation has failed or is not applicable.
Synopsis
racadm raid forceonline:<PD FQDD> {current|pending}
Input
• –current <optional>: Performs the conguration right now.
•
NOTE: If this requires the system to reboot, then the system is rebooted.
• –pending: Save the conguration change for a later application. You can use a combination of the –pending and
–current ags on multiple commands to reduce the possible number of system reboots.
76 RACADM Subcommand Details