CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.10 For Dell PowerEdge VRTX

This command is an optimized version and displays all disk objects for the enclosure FQDD.

racadm raid get pdisks --refkey <enclosure/Controllers

FQDDs separated by comma

> -o -p <property names separated by comma>

optimized and filtered version.

• Monitor and Inventory all Fans connected to the enclosure

racadm raid get fans --refkey <enclosure/Controllers FQDDs separated

by comma>

This command displays all fan keys connected to the enclosures referred as refkeys.

racadm raid get fans --refkey <enclosure/Controllers FQDDs separated

by comma

> -o optimized version.

This command displays all fan objects for the enclosure FQDD.

racadm raid get fans --refkey <enclosure/Controllers FQDDs separated

by comma

> -o -p <property names separated by comma> optimized and

filtered version.

• Monitor and Inventory all EMMs connected to the enclosure

racadm raid get emms --refkey <enclosure/Controllers FQDDs separated

by comma>

This command returns all EMM keys connected to the enclosures being mentioned as refkeys.

racadm raid get emms --refkey <enclosure/Controllers FQDDs separated

by comma > -o

This command is an optimized version and displays all EMM objects for the enclosure FQDD.

racadm raid get emms --refkey <enclosure/Controllers FQDDs separated

by comma > -o -p <property names separated by comma>

This command is an optimized and ltered version.

• Monitor and Inventory all Temperature Probes connected to the enclosure

racadm raid get tempprobes --refkey <enclosure/Controllers FQDDs

separated by comma>

This command displays all temperature probe keys connected to the enclosures being mentioned as refkeys.

racadm raid get tempprobes --refkey <enclosure/Controllers FQDDs

separated by comma > -o

This command is an optimized version and displays all temperature probe objects for the enclosure FQDD.

racadm raid get tempprobes --refkey <enclosure FQDDs

separated by comma > -o -p <property names separated by comma>

optimized and filtered version

• Monitor and Inventory all Power Supply Units connected to the enclosure

racadm raid get psus --refkey <enclosure/Controllers FQDDs separated

by comma>

This command displays all power supply units connected to the enclosures being mentioned as refkeys.

racadm raid get psus --refkey <enclosure/Controllers FQDDs separated

by comma > -o

This command is an optimized version and displays all power supply units objects for the enclosure FQDD.

racadm raid get psus --refkey <enclosure/Controllers FQDD's separated

by comma > -o -p <property names separated by comma>

This command is an optimized and ltered version.

RACADM Subcommand Details