CLI Guide

<uc>

Temp 1 Ambient_Temp OK 21 celcius N/A 40

senType> <Num> <sensorName> <status> <AC-OK status>

PWR 1 PS-1 Online OK

PWR 2 PS-2 Online OK

PWR 3 PS-3 Online OK

PWR 4 PS-4 Slot Empty N/A

PWR 5 PS-5 Failed OK

PWR 6 PS-6 Slot Empty N/A

racreset

Table 80. Details of racreset

Description Performs a CMC or a RAC reset operation.

NOTE: To use this subcommand, you must have the Chassis Administrator privilege.

NOTE: When you run a racreset subcommand, iDRAC may require up to two minutes to

return to a usable state.

NOTE: You must restart your system after performing a hard reset of iDRAC.

Synopsis

racadm racreset [-m <module>]

Input (module) — sled-n, where n=1–4.

NOTE: You can specify multiple modules: -m <module 1> –m <module 2>.

Example

• Reset CMC:

racadm racreset

• Reset server 1.

racadm racreset -m server-1

• Reset servers 1 and 3.

racadm racreset -m server-1 -m server-3

racresetcfg

Table 81. Details of racresetcfg

Description Resets CMC conguration to factory default settings.

NOTE: To use this, you must have the Chassis Administrator privilege.

Synopsis

racadm racresetcfg [-m <module>] [-c <feature>]

Input

• -m : <module> — Must be one of the following values:

– chassis — default state, if -m is not specied.

– server-n, where n=1–4

– switch-n, where n=1

• -c : <feature> — Must be one of the following values:

– ad — Reset Active Directory properties to the default value. The default setting is “disabled”.

70 RACADM Subcommand Details