CLI Guide

to the destination IPv6 address on the basis of current routing-table
contents.
To use this subcommand for CMC, you must have the Administrator
privilege.
Synopsis
racadm ping6 <ipv6address>
Example
racadm iping6 198.162.0.2
IPING6 198.162.0.2 (192.168.0.1): 56 data bytes
64 bytes from 198.162.0.2: icmp_seq=0 ttl=121
time=2.9
ms
--- 198.162.0.2 ping statistics ---
1 packets transmitted, 1 packets received, 0
percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
racdump
Table 79. Details of racdump
Description This subcommand displays the comprehensive chassis status and
conguration state information, and historic event logs. Used for
post-deployment conguration verication and during debugging
sessions.
To use this subcommand for CMC, you must have the
Administrator privilege.
Synopsis
racadm racdump
Input Racdump includes the following subsystems and aggregates the
following RACADM commands:
• General System/RAC information - getsysinfo
• Session information - getssinfo
• Sensor information - getsensorinfo
• Switches information (IO Module) - getioinfo
• Mezzanine card information (Daughter card) - getdcinfo
• All modules information - getmodinfo
• Power budget information - getpbinfo
• KVM information - getkvminfo
• NIC information (CMC module) - getniccfg
• Redundancy information - getredundancymode
• Trace log information - gettracelog
• RAC event log - getraclog
• System event log - getsel
68 RACADM Subcommand Details