CLI Guide

Table 63. Cable sensor
<Num> <seonsorName> <status>
1 IO-Cable OK
2 FPC-Cable OK
Table 64. Door sensor
<Num> <sensorName> <status>
1 Chassis Intrusion Closed
getslotname
Table 65. Details of getslotname
Description
Displays the name, host name (if available) and iDRAC DNS name of all the four slots, or of a specied slot
(indicated by the slot number) in the chassis. Optionally, use this command to nd if the slot name or host
name, or iDRAC DNS name is displayed in the CMC Web interface, or with the getslotname [-i <slotNum>
| -h] command. If the host name is not available, the static slot name is used.
NOTE: Lengthy slot names, host names, or iDRAC DNS names are truncated when the slot
names are displayed.
To use this subcommand, you must have CMC Login User privilege.
Synopsis
• racadm getslotname
• racadm getslotname [-i <slotNum> | -h]
• racadm getslotname -h
Input
• None -
Displays the slot name for all the four slots in the chassis.
• -i <slotNum> - species the slot number.
Values: 1 to 4
• -h - Species whether to display the slot name or the host name (if available).
– 0 — Displays the slot name
– 1 — Displays the host name instead of the slot name
– 2 — Displays the iDRAC DNS name instead of the slot name
Example
• Display all slots names.
racadm getslotname
<Slot #> <Slot Name> <Host name> <iDRAC DNS Name>
1 SLOT-01
2 WIN-UF2EVKG8PJ5 WIN-UF2EVKG8PJ5 idrac-2QDJH62
3 SLOT-03
4 SLOT-04
• Display the name of the third slot.
racadm getslotname -i 3
• Verify if the option ‘0’ is set for displaying the slot name.
• Verify if the option ‘1’ is set for displaying the host name.
• Verify if the option ‘2’ is set for displaying the iDRAC DNS name.
RACADM Subcommand Details 57