CLI Guide

NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel, and

Inniband.

Synopsis

racadm getioinfo

racadm getioinfo [-m <module>]

racadm getioinfo [-m <module>][-s]

Input -m — Species the module or device. The <module> must be switch — <n>, where n = 1–2

-s — Displays the stack information.

Table 34. Example

switch-1 ON R1-PT VRTX

1Gb Master

Pass-

through

N/A Gigabit

Ethernet

Present OK

getled

Table 35. Details of getled

Description Displays the LED settings on a module: blinking, not blinking, or

unknown (for empty slots).

To use this subcommand, you must have the Login User privilege.

Synopsis

racadm getled -m <module>

Input CMC only options:

-m <module> — Species the module whose LED settings you

want to view.

<module> can be one of the following:

• server-n where n=1–4

• switch-n where n=1

• chassis

• cmc-active

Example For CMC:

• racadm getled -m server-10

<module> <LED state> server-10 Blinking

• racadm getled -m chassis

<module> <LED state> server-10 Not blinking

• racadm getled -m server-1

<module> <LED state> server-1 ON

• racadm getled -m server-9

<module> <LED state> server-9 Extension(1)

42 RACADM Subcommand Details