CLI Guide
getdcinfo
Table 27. Details of getdcinfo
Description Displays general I/O module and daughter card conguration information. Only the CMC controls
daughtercards.
To use this subcommand, you must have the CMC Login User privilege.
NOTE: Fabric verication for server DCs is performed only when the chassis is turned on.
When the chassis is on stand-by power, iDRACs on the server modules remain turned o
and thus are unable to report the server's DC fabric type. The DC fabric type may not be
reported in the CMC user interface until iDRAC on the server is turned on.
Synopsis
racadm getdcinfo
Input -n — Displays the model names for the daughter cards in servers.
Table 28. Example
<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
Table 29. getdcinfo
<Server#> <Presence> <DC1 Model Name> <DC2 Model Name>
server-1 Present None None
server-2 Not Present None None
server-3 Not Present None None
server-4 Present None Broadcom M5708t
getexaddr
Table 30. Details of
getexaddr
Description Enabled or disabled status is displayed for the entire chassis and
fabric ID decoder. Use the command with -i option to display the
MACs/WWN on a per-slot-basis
The decoder values in the Type column indicate the protocols of
the network cards:
• 0— Unsupported
• 1— ISCSI
• 2— FCoE-FIP
• 3— iSCSI/FCoE-FIP
To use this subcommand, you must have CMC Login User privilege.
40 RACADM Subcommand Details