CLI Guide

eventlters
Table 16. Details of eventlters
Description
Gets, sets, and displays the list of event lter settings.
To use this subcommand with the get option, you must have the CMC Login User privilege.
Synopsis
racadm eventfilters <eventfilters command type>
racadm eventfilters get -c <alert descriptor>
racadm eventfilters set -c <alert descriptor>-n <notifications>
NOTE: The general format of an alert descriptor:
cmc.alert.category.[subcategory].[severity]
where, category is mandatory, but subcategory and severity are optional. A severity cannot
precede a subcategory.
Valid category values are:
• System
• Cong
• Updates
• Storage
• Audit
Valid severity values are:
• Critical
• Warning
• Informational
Valid examples of alert descriptors are:
• cmc.alert.all
• cmc.alert.audit
• cmc.alert.audit.lic
• cmc.alert.audit.warning
• cmc.alert.audit.lic.critical
Input
• get - Displays the list of event lter settings.
• set - Congures the actions and notications for a given event lter conguration.
• -c - Alert descriptor of the specic event lter.
• -n - The notication to be sent when the event occurs. Valid values are all, snmp, ipmi, lcd, email, or
none. You can append multiple notications separated by a comma. You cannot enter the values all
or none with other notications.
NOTE: If both event generation interval and notications are congured and there is an error
while conguring the notications, the event generation interval is not set. The valid values
are from 0–365. 0 disables the event generation.
Example
• Display all available event lter congurations:
racadm eventfilters get -c cmc.alert.all
• Display eventlter congurations for a specic category. For example, audit:
racadm eventfilters get -c cmc.alert.audit
RACADM Subcommand Details 31