CLI Guide

cfgNetTuningNicFullDuplex (Read/Write)
Table 365. Details of cfgNetTuningNicFullDuplex
Description Species the duplex setting for the RAC or CMC NIC. This property
is used only if the cfgNetTuningNicAutoNeg is set to 0 (disabled).
Legal Values
• 0 (Half Duplex)
• 1 (Full Duplex)
Default 1
cfgNetTuningNicMtu (Read/Write)
Table 366. Details of cfgNetTuningNicMtu
Description The size in bytes of the maximum transmission unit used by CMC
NIC.
Legal Values 576 – 1500
Default 1500
NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and cfgNetTuningMtu is set to a lower value, the CMC uses an
MTU of 1280.
cfgNetTuningNicAutoneg (Read/Write)
Table 367. Details of cfgNetTuningNicAutoneg
Description Enables autonegotiation of physical link speed and duplex. If
enabled, autonegotiation takes priority over other values set in this
group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default 1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
188
CMC Property Database Group and Object Descriptions