CLI Guide

racadm getconfig -g cfgServerInfo -i 1
# cfgServerInfoIndex=1
# cfgServerSlotNumber=1
# cfgServerServiceTag=1S0M0G1
cfgServerName=SLOT-01
# cfgServerFW=1.40 (Build 12)
# cfgServerBIOS=4.0.2
# cfgServerBmcMacAddress=00:18:8B:FF:41:43
# cfgServerNic1MacAddress=00:1A:A0:FF:D9:F4
# cfgServerNic2MacAddress=00:1A:A0:FF:D9:F6
cfgServerPriority=1
cfgServerNicEnable=1
cfgServerIPMIOverLANEnable=1
# cfgServerPowerBudgetAllocation=0
cfgServerDNSRegisterIMC=0
cfgServerDNSIMCName=iDRAC-1S0M0G1
cfgServerRootPassword=******** (Write-Only)
cfgServerFirstBootDevice=0
# cfgServerBootOnce=1
# cfgServerPowerConsumption=0
cfgActiveDirectory
This group contains parameters to congure the Active Directory feature.
Use this object with the getconfig or config subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
NOTE
: You can congure any setting that is not preceded by the hash sign (#) in the output. To modify a congurable object,
use the -o option.
The following sections provide information about the objects in the cfgActiveDirectory group.
150
CMC Property Database Group and Object Descriptions